南京四通系统集成有限公司- 首页

产品直通车

Product Direct Train

产品中心 / TEK PRODUCTS

80i-110s 交/直流电流钳

主要特点

下载附件品牌官网

AC/DC Current clamp

The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

· Current Range: 0.1 to 100A DC or 0.1 to 70A AC

· Basic Accuracy (DC to 1kHz):

100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA

10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA

40A to 80A +/- 12% of reading + 50mA

80 to 100A +/- 15% of reading

· Output Signal: 10A range: 100mV/A | 100A range: 10mV/A

· Bandwidth: 1Hz to 20kHz

· Working Voltage: 600V AC rms

· Maximum Conductor Size: 11.8 mm (.46 inch) diameter

· Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V

Specifications
Nominal current range	10 A, AC/DC 100 A, AC/DC
Continuous current range	0.1 A - 10 A AC/DC 1 A - 100 A AC/DC
Maximum Non-Destructive Current	140 A - 2 kHz
Lowest measurable current	0.1 A
Basic Accuracy	3% + 50 mA (@ 10 A) (% reading + floorspec)
Useable frequency	DC - 100 kHz
Output level(s)	100 mV/A 10 mV/A
Zero error adjustment	Yes

Safety Specifications
Safety	CAT II, 600 V CAT III, 300 V
Maximum voltage	600 V

Mechanical & General Specifications
Warranty	1 year
Battery Life	9 V, 55 h
Maximum conductor diameter	11.8 mm
Output cable length	1.6 m
BNC Adapter	Yes

型号名称	描述
80i-110s	交/直流电流钳